EN Approved Fireman Suit

The Fireman Suit is an essential equipment for a firefighter in addition to SCBA. The fire man suit provides protection to the body from heat, flame, low voltage electric current, low volume chemical splashes etc.

The fire suit enables the firefighter to fight the fire from close proximity, even in a high rise building on fire where the temperatures can reach up to 1985ºF (1085ºC) at which temperature even brass starts melting.

The Resguardo Fire Man Suit consists of a special fire resistent Pant & Jacket, Helmet with neck protector, Protective Flash Hood, Glove and Boot It provides protection from low volume chemical splash, mist, environmental hazards, cold and cool environment.

POWDER TYPE FIRE EXTINGUISHER (MAP 90%) Technical Specification:-

Capacity1 Kg2 Kg4 Kg6 Kg9 Kg
MAP Content90%90%90%90%90%
Fire Rating1A 21B1A 34B3A 89B4A 144B6A 233B
Diameter (MM)85±0.5107±0.5140±0.5160±0.5174±0.5
Total Height (MM)328±2380±2432±2475±2575±2
Empty weight (KG) Approx.1.11.322.43.1
Full weight (KG) Approx2.13.368.412.1
Avg. Effective Discharge Time08 SEC10 SEC14 SEC.20 SEC.23 SEC.
Operating temperature-20°C TO +60°C-20°C TO +60°C-20°C TO +60°C-20°C TO +60°C-20°C TO +60°C
Service Pressure15 bar15 bar15 bar15 bar15 bar
Maximum Service Pressure16.5 bar16.5 bar16.5 bar16.5 bar16.5 bar
Test Pressure35 bar35 bar35 bar35 bar35 bar

Fireman Suit Features

1. The fireman’s Pant & Jacket: The jacket is crucial, being the largest and most important item. It includes a wrist guard for protecting exposed skin, a throat and neck-protecting collar, special elbow guards, heat-resistant pants with reinforced knee guards, cargo pockets, suspenders, and stretch waistbands. Both the jacket and pants are EN 1149-3 approved.

The fireman’s jacket and pant are EN 1149-3 approved.

2. Helmet with neck protector: The helmet protects the head, neck and face. It consists of a cap shell, cap hoop, buffer layer and chin strap. It has an anti-scratch outer coating and anti-fog visor. It is resistant to fire for long periods of up to 1400⁰ C for 30 minutes.

The helmet is EN443 approved.

3. Protective flash hood: The protective hood provides thermal insulation to the sensitive parts of the head. It has an elasticated face opening with comfortable seams. The hood is also flame and abrasion-resistant.

4. Fireman’s Glove: Fireman gloves is a five fingerstyle provides protection to the hands from heat and is also water repellent.

The glove is EN407 /EN659 /EN420 / EN388 approved.

5. Fireman’s Boot: The fireman’s boot provides protection to the fireman’s foot. It is thermal resistant, waterproof, puncture-resistant, chemical resistant, anti-crush and electrically insulated. It has soles that are slip-resistant, highly durable and have minimum heel impact. The steel midsole provides protection from pins and sharp objects.

Approval: It has following approvals

European Standard: CE EN 15090: 2006 (F2 IS HI3 PT CI)
EN ISO 20345: 2004 (SB P E CI SRA)
Australia New Zealand Standard: AS/NZS 4821: 2006


Our Certificates

We offer comprehensive solutions to meet your fire prevention and firefighting needs!

Fireman Suit

Need Help!