Fire Extinguisher

A fire extinguisher is an active fire Suppression device which can put off a fire and prevent a major fire accident from occurring.

Why Is It Necessary?

During fire accidents, the first two and half minutes are crucial as smoke can engulf an entire floor in minutes. Hence it is essential to put off the fire at the initial stage itself and prevent it from growing in to a major fire accident.

CO2 Fire Extinguisher

Carbon-di-oxide Gas media is non-conductive, non-contaminating, non-residual, suitable for clean environments such as IT/ITES/Pharma/Food Processing etc

Capacity2 Kg3 Kg4.5 Kg
Fire Rating8B13B21B
Avg discharge time12 sec14 sec14 sec
Diameter(Approx.)108±10 mm140±10 mm140±10 mm
Filled Weight(Approx.)8.9 kg or 8.2 kg12.5 kg or 11.9 kg17 kg or 16.4 kg
Empty Weight(Approx.)6.9 kg or 6.2 kg9.5 kg or 8.4 kg12.5 kg or 11.9.4 kg
Operating Temperature-30°C to +55°C-30°C to +55°C-30°C to +55°C
Maximum Service Pressure106 bar110 bar105 bar
Test Pressure250 kg/cm²250 kg/cm²250 kg/cm²
  • Manufacturing industries
  •  High rise buildings
  • Software industries
  • Hospitals
  •  Hotels
  •  Malls
  •  Schools
  •  Apartments

Foam Type Fire Extinguisher

Foam Type Fire Extinguisher ( AFFF – Aqueous Film Forming Foam) is a permanent smothering media, very effective for equipments where re-ignition could occur viz., boilers, HSD tanks,furnace, annealing plants, air crafts etc.

Capacity9L
Fire Rating2A : 21B
Avg discharge time50 sec
Height(Approx.)575 mm
Diameter(Approx.)180±10 mm
Filled Weight(Approx.)12 kg
Empty Weight(Approx.)4.3 kg
Operating Temperature+5°C to +55°C
Working Pressure at 20°C15 bar
Maximum Service Pressure18 bar
Test Pressure35 bar
  • Manufacturing industries
  •  High rise buildings
  • Software industries
  • Hospitals
  •  Hotels
  •  Malls
  •  Schools
  •  Apartments

Water Type Fire Extinguisher

Water- The Natural fire fighting media is used where cooling is the only way of putting off the fire permanently viz. cotton, textiles, paper, wood etc..

Capacity9L
Fire Rating2A
Avg discharge time42 sec
Height(Approx.)575 mm
Diameter(Approx.)180±10 mm
Filled Weight(Approx.)12 kg
Empty Weight(Approx.)4.3 kg
Operating Temperature+5°C to +55°C
Working Pressure at 20°C15 bar
Maximum Service Pressure18 bar
Test Pressure35 bar
  • Manufacturing industries
  •  High rise buildings
  • Software industries
  • Hospitals
  •  Hotels
  •  Malls
  •  Schools
  •  Apartments

Clean Agent – HFC-236FA

HFC-236FA Clean Agent (Low Pressure) is an advanced environment friendly zero ozone depletion gas. This media is exclusively designed for sensitive equipments such as Computer rooms, Libraries, Museums, Laboratories, Data processing centers, Industrial process control rooms, Chemical storage rooms and so on..

Capacity1Kg2 Kg4 Kg6 Kg
Fire Rating8B8B1A : 13B1A : 21B
Avg discharge time11 sec12 sec14 sec22 sec
Height(Approx.)325 mm380 mm490 mm530 mm
Diameter(Approx.)86±10 mm106±10 mm140±10 mm150±10 mm
Filled Weight(Approx.)2 kg3.6 kg6.7 kg8.9 kg
Empty Weight(Approx.)1 kg1.6 kg2.7 kg2.9 kg
Operating Temperature-20°C to +55°C-20°C to +55°C-20°C to +55°C+5° C to +55°C
Working Pressure at 20°C9 bar9 bar9 bar9 bar
Maximum Service Pressure15 bar15 bar15 bar15 bar
Test Pressure35 bar35 bar35 bar35 bar
  • Environmental friendly replacement for Halon 1211
  •  Clean and Insulative
  • Efficient and leaves no residue
  • Does not deplete ozone layer in atmosphere
  •  Safe for people
  •  Discharged as gas – boiling point is -1.40C
  • Manufacturing industries
  •  High rise buildings
  • Software industries
  • Hospitals
  •  Hotels
  •  Malls
  •  Schools
  •  Apartments

Fire Extinguisher